|
P type nylon Lock nut Zinc Plated 1/2 inch UNF Also known as GHF225 GFK3225 NY608041 252164
Use in front suspension, drag links, front hub and a...
|
|
|
|
Price: £0.30
|
 |
|
|
![Nyloc Nut T 1/2 inch UNF [aka GHF275] TN3211](shopthumbs/254.jpg)
|
THIN or Half Nyloc Nut used on 1/2 ins UNF Bolt holding front wishbone to crossmember.
...
|
|
|
Price: £0.91
|
|
|
|
![Nyloc Nut T 7/16 UNF [GHF274]...... TN3210](shopthumbs/465.jpg)
|
THIN type Nyloc Nut used on Rack and Pinion and Rear Subframe.
Also GHF 274
Never fit Nyloc nuts more than once.
...
|
|
|
|
Price: £0.22
|
|
|
|
|
Lovely Powder Coat finish.
Exchange product
Send your used or worn one to
LDpart Ltd
5 St Giles Close
Wendlebury
Bicester
Oxon OX25 2PZ...
|
|
|
|
Price: £9.58
|
|
|
|
|
Kit of seals to use when overhauling a Power Steering Rack but as per BL Parts Catalogue plus the Gasket - Includes control valve seal for Adwwest and...
|
|
|
|
Price: £23.88
|
|
|
|
|
Special 7mm wide Cable Tie type clip to secure large end of Steering Rack Gaiter or Boot to rack body. Much wider than the normal type to ensure fir...
|
|
|
Price: £0.59
|
|
|
|
|
Black plastic cable tie suitable for securing the Steering Rack Gaiter or Boot to the tie rod. The picture shows the pull off stage of the tie allowin...
|
|
|
|
Price: £0.11
|
|
|
|
|
Rear Wheel cylinder by Borg & Beck, a quality supplier. The pack includes the bleed nipple and the circlip. Weight is 475 grams
Listed under f...
|
|
|
Price: £11.70
|
|
|
|
|
Kit of Screws to mount the Steering Rack to the Cross Member.
The BL catalogue states use HU1009 a 1 1/8 screw.
The official Factory information lat...
|
|
|
|
Price: £4.01
|
|
|
|
![Set Screw [ HU1009 ] HU1010](shopthumbs/589.jpg)
|
Set Screw used to hold steering rack to car. Use an extra washer on the hole nearest the grease plug, as this screw is 1 1/4 and not 1 1/8 but `BL ak...
|
|
|
|
Price: £0.80
|
|
|
|
|
Slotted nut on front axle that retains the wheel bearing and is secured with Split or Cotter Pin PC20 or PC14 `a bit longer` found in the hub kit GHK ...
|
|
|
|
Price: £1.64
|
|
|
|
|
Split pin for securing the castellated nut after adjusting the front Wheel bearings.
These are included n Bearing kits and offered here only for use...
|
|
|
Price: £0.42
|
|
|
|
